System messages occasionally appear on the display of the Thermomix ® TM5. This does not mean that your appliance is faulty. These are usually recommendations for action which you can recognize in abbreviated form on the display.
Here you will find an overview of the various system messages of the Thermomix ® TM31, along with their causes and recommended action to take.
If, after you have taken the recommended action, repairs have to be made, you can find more information about repairs here.
| Code | Reason for message | Recommended action |
| 22 | Power supply | A repair is only required if the error message keeps reappearing. |
| 23 | Mixing bowl (heating) | Pull out plug and reconnect. Re-start Thermomix ®. Clean the mixing bowl contacts and refit the mixing bowl. If this does not solve the problem, the mixing bowl will need to be repaired or replaced. |
| 24 | Weak network current | Check network current. A repair is only required if the error message keeps reappearing. |
|
26 32 |
Hardware | Pull out plug and reconnect. Re-start Thermomix ®. A repair is only required if the error message keeps reappearing. |
|
27 28 30 31 |
Hardware | A repair is only required if the error message keeps reappearing. |
| 34 | Motor overloaded | Please check whether the contents of the mixing bowl are blocking the mixing knife. A repair is only required if the error message keeps reappearing. |
|
35 36 37 |
Hardware | A repair is only required if the error message keeps reappearing. |
|
38 39 |
Hardware | Pull out plug and reconnect. Re-start Thermomix ®. A repair is only required if the error message keeps reappearing. |
| 52 | Mixing bowl(heating) | If you have added very cold or frozen food to the mixing bowl, or if you have stored the mixing bowl in the fridge and fitted it directly to the appliance, please take the contents of the mixing bowl out, rinse the bowl with warm water, put the contents back in the bowl and carry on with the recipe as quickly as you can. To prevent this problem from happening again, always work quickly when working with very cold and frozen ingredients. Otherwise, clean the mixing bowl contacts and refit the mixing bowl. If this does not solve the problem, the mixing bowl will need to be repaired or replaced. |
| 53 | Mixing bowl (heating) | Clean the mixing bowl contacts and refit the mixing bowl. If this does not solve the problem, the mixing bowl will need to be repaired or replaced. |
|
55 |
Scales | A repair is only required if the error message keeps reappearing. |
|
58 59 60 61 |
Hardware | A repair is only required if the error message keeps reappearing. |
| 67 | Scales | A repair is only required if the error message keeps reappearing. |
| 68 | Hardware | A repair is only required if the error message keeps reappearing. |
| 69 | Heating | A repair is only required if the error message keeps reappearing. |
| 70 | Hardware | Pull out plug and reconnect. Re-start Thermomix ®. A repair is only required if the error message keeps reappearing. |
| 72 | Hardware | Repair required. |
| LOAD | Motor overloading and overheated | The motor is overloaded or overheated. Wait until the motor has cooled down. Reduce the amount of ingredients in the mixing bowl. |
| OPEN | Mixing speed selector not in OPEN position when appliance was switched on. | Turn mixing speed selector to OPEN position. A repair is only required if the error message keeps reappearing. |
| 8888 | Scales value outside permitted range | Zero the scales, reduce weight, check scales feet. A repair is only required if the error message keeps reappearing. |
| ould | Scales value beyond measurement range | Reduce weight, check scales feet. A repair is only required if the error message keeps reappearing. |
| 0 | Scales value beyond measurement range | Reduce weight, check scales feet. A repair is only required if the error message keeps reappearing. |